Owens Corning Attic Insulation: The Burbank Owner’s Guide
We stock and install Owens Corning attic insulation throughout Burbank, with most blown-in and batt jobs completed in a single visit. Installed pricing in Burbank typically runs $1,800 to $4,200 depending on attic size and the Owens Corning product line you choose, and we can usually get a crew to your home within 48 hours. Homeowners usually find us the same way: an energy bill spikes, a bedroom never holds temperature, or a pest inspection turns up chewed batts and compressed R-value. The fix is straightforward and we carry the materials on our trucks.
Key Takeaways
- We install Owens Corning EcoTouch, AttiCat, and ProPink lines, matched to your attic’s existing setup.
- Most Burbank attics need R-38 to R-49; many older homes we inspect are sitting at R-11 or less.
- Replacement includes removal of failed material, air sealing, and re-insulation, typically in one day.
- We’re an independent installer, not an Owens Corning dealer, which means we match the right product to the job without brand-locked pricing.
Which Owens Corning Models This Applies To
If you have Owens Corning attic insulation in a Burbank home, you’re almost certainly looking at one of three lines: EcoTouch batts, AttiCat blown-in fiberglass, or ProPink blown-in fiberglass. EcoTouch batts are the most common in Burbank attics built or retrofitted after 1995, and they’re easy to identify by the printed R-value on the kraft facing. AttiCat and ProPink are loose-fill products blown in through a hose; you’ll find the bag labels stapled to a rafter or joist in most attics, or you can check the pink fiberglass color and loose, fluffy consistency.
One compatibility gotcha we see in Burbank regularly: AttiCat cannot be top-dressed over old batt insulation that has a vapor barrier. The kraft paper traps moisture and you end up with mold inside the fiberglass. We remove the old barrier first. For aftermarket equivalents, we do stock quality fiberglass from CertainTeed and Johns Manville, but for Owens Corning attics we generally stay with Owens Corning product because the settled-depth-to-R-value charts are specific to the manufacturer, and guessing that math is how attics end up under-insulated.
Signs Your Owens Corning Attic Insulation Is Failing
- Upstairs rooms run 8 to 12 degrees hotter than downstairs in summer. This usually means the insulation has settled or was never deep enough. Owens Corning loose-fill loses loft over time, especially if foot traffic compressed it during HVAC or electrical work.
- You can see the tops of your ceiling joists from the attic hatch. In Burbank’s climate, code-level performance wants 14 to 18 inches of blown-in fiberglass. If joists are visible, you’re running at roughly R-19 or worse.
- Mold or dark staining on batts near the eaves. Burbank’s morning marine layer pushes moisture into poorly vented attics. Once the fiberglass stays damp, R-value collapses and the material never fully recovers.
- Rodent droppings or nesting material in the fiberglass. We pull rat-compromised insulation out of Burbank attics weekly, especially near Magnolia Park where mature trees give easy roof access. Chewed and urine-soaked batts lose their air-trapping structure permanently.
- Energy bill climbed 20 to 30 percent without a change in usage. That’s the attic telling you the insulation has failed or was never right from the start. A home energy audit will confirm it with thermal imaging.
Replacement Cost & What’s Included
For a typical 1,200 to 1,500 square foot Burbank attic, we quote most Owens Corning re-insulation jobs between $2,200 and $3,800 installed. That includes removal and bagging of failed material, air sealing around top plates and penetrations, and blowing in fresh Owens Corning fiberglass to R-38 or R-49. A larger or steeper attic with difficult access will push toward the top of that range, and we’ll tell you exactly why before any work starts.
Every quote is line-itemed so you see the parts, labor, and disposal separately. The work is backed by our 90-Day Done Right Promise, which means if something isn’t right after we leave, we come back and make it right at no charge. You’ll also get the $50 Off Any Repair Over $250 or the permanent 5% Senior & Veteran discount applied if you qualify, and we’ll let you know which one saves you more. We also stock Reflectix radiant barrier for Burbank attics that need a reflective layer under the roof deck alongside the fiberglass.
DIY or Call Us?
There are two things a Burbank homeowner can safely do before calling us. First, measure your current insulation depth with a yardstick in a few spots. Second, check the attic hatch weatherstripping, because a leaky hatch wastes whatever insulation you have. Beyond that, working in a Burbank attic in August is genuinely dangerous: surface temperatures regularly exceed 130 degrees, and one misplaced step through a ceiling joist turns a $3,000 insulation job into a $6,000 drywall repair.
Fiberglass blown-in work also requires a specific machine and respirator discipline; the glass fibers and dust are not something to inhale. If your Owens Corning insulation is failing, call (747) 837-5834 and we’ll assess it. Most jobs are completed in a single visit, and a live person answers the phone 24/7, no voicemail runaround.
FAQs
Owens Corning fiberglass batts and blown-in products can last 30 to 50 years if they stay dry and undisturbed, but real-world Burbank conditions including rodent activity, roof leaks, and foot traffic from tradespeople typically cut that to 15 to 25 years before R-value drops enough to matter. Call (747) 837-5834 for a free attic assessment if yours is over 15 years old.
In most Burbank homes, a full replacement is more cost-effective than patching. Once batts are compressed, water-damaged, or rodent-soiled, their air-trapping structure is gone and you can’t restore it. We’ll always tell you if spot repair makes sense, but honest answer: full replacement is usually the better long-term play.
Most Burbank attic re-insulation jobs are done in one day. Removal and bagging takes a couple of hours, air sealing takes another hour or two, and blowing in fresh Owens Corning fiberglass takes about 90 minutes for a typical attic. We’ll have your attic fully restored before dinner.
We keep Owens Corning EcoTouch batts and AttiCat blown-in fiberglass on our trucks and in our Burbank-area warehouse, so most jobs start the same day we quote. If your attic needs a specific ProPink specification or a special depth, we’ll have it in hand within 48 hours and schedule accordingly.
Good insulation shouldn’t be something you think about. That means it’s working. If your Owens Corning attic insulation in Burbank isn’t doing its job, call (747) 837-5834 for a free estimate. Neil Ashford and our crew have been serving Burbank homeowners since 2011, and we’ll give you an honest read on what you actually need, not what’s easiest to sell.
Written by Neil Ashford, Owner, Warmline Insulation Co. at Warmline Insulation Co., serving Burbank and nearby areas.