Owens Corning Insulation Removal & Replacement in Burbank: What to Know First
We’re an independent Owens Corning service provider in Burbank, and we specialize in removing and replacing Owens Corning insulation that’s failed, been contaminated, or simply aged past its useful life. Most Owens Corning removal and replacement jobs in Burbank are completed in one to two days, depending on attic size and access, with pricing that’s quoted upfront before we ever put a ladder up. If you own a Burbank home with Owens Corning pink fiberglass, ProPink blown-in, or older Owens Corning batt insulation that’s settled, rodent-damaged, or water-soaked, this page tells you exactly what we’ll do about it. Call (747) 837-5834 any time, day or night, and a live person answers. Always.
How Owens Corning Products Fail - and How We Fix Them
Owens Corning makes solid insulation. We install it. But nothing lasts forever, and we see the same failure patterns across Burbank attics year after year. Here’s what actually goes wrong:
- Settled ProPink blown-in fiberglass. The L77 loose-fill line, common in Burbank homes built in the 1970s through 1990s, loses loft over time. We regularly find 14 inches that’s compacted down to 6. That cuts R-value by more than half. We remove the settled material, air-seal the attic floor, and blow fresh ProPink to the correct depth for Burbank’s climate zone.
- Rodent-nested batts in older R-19 and R-30 lines. Owens Corning’s older kraft-faced batts make prime nesting material for roof rats, which are persistent across Burbank neighborhoods like Chandler Park and the Verdugo foothills. Once urine and feces saturate the fiberglass, cleaning isn’t enough. We remove the contaminated batts, seal entry points, and replace with fresh material.
- Water-damaged EcoTouch batts. The EcoTouch line, once marketed for its high recycled content, absorbs water readily when roof leaks or AC overflow pans fail. Wet fiberglass loses insulating ability and grows mold on the kraft facing. We trace the moisture source first, then remove and replace the affected batts so you’re not paying twice.
- Vermiculite with potential asbestos contamination. Burbank homes built before 1990 sometimes have zonolite vermiculite insulation in attic floors. Owens Corning never manufactured vermiculite, but many Burbank homes have it layered under pink fiberglass. We test before touching it. If it comes back hot, we follow strict containment and removal protocols.
- Improperly installed ProPink Complete batts. We find plenty of Burbank attics where batt insulation was crammed around can lights, vents, and framing, crushing the fibers and defeating the R-value. The fix isn’t always full removal. Sometimes we extract the compressed sections and re-install correctly, with proper baffles and air sealing behind them.
Our Owens Corning Insulation Removal & Replacement Process
- 1
Call and talk to a person. You reach us, not a machine. We ask about your attic, your symptoms, and what insulation you have. Then we schedule a visit that works for you.
- 2
Attic inspection and measurement. We inspect the insulation condition, measure depth and coverage, check for moisture, rodent activity, or vermiculite. We also look at the air sealing situation because removal without air sealing just means new insulation fails the same way.
- 3
Upfront quote before we start. You get a firm number. It includes removal, disposal, any repairs to air sealing or baffles, and the replacement insulation. No surprise line items later.
- 4
Removal with containment. We use HEPA-filtered vacuums for loose-fill removal and bag everything for proper disposal. For contaminated material, we set up containment zones so dust and fibers don’t spread into your Burbank home.
- 5
Air sealing and prep. Before new Owens Corning goes in, we seal top plates, can light housings, plumbing penetrations, and the attic hatch. This is the step most contractors skip, and it’s why their insulation doesn’t perform.
- 6
Replacement and verification. We install fresh Owens Corning material at the correct R-value for Burbank’s climate, then photograph the finished work. Before we leave, we walk you through what we did. If it’s not done right within 90 days, our Done Right Promise means we come back and make it right.
What Owens Corning Insulation Removal & Replacement Costs in Burbank
Here’s what Burbank homeowners typically pay for the jobs we handle most:
- Attic insulation removal (blown-in, up to 1,200 sq ft): $1,200 to $2,400
- Full attic removal and replacement with ProPink blown-in: $2,800 to $5,500
- Rodent-contaminated insulation removal and replacement: $3,000 to $6,500, depending on contamination extent and entry-point sealing
- Vermiculite removal (asbestos abatement separate): $4,000 to $8,000 when abatement protocols are required
- Partial batt replacement (water-damaged or compressed sections): $800 to $2,000
Cost moves on three things: attic size, contamination type, and whether air sealing is needed (it almost always is). We quote it all upfront, and we’ll apply the $50 Off Any Repair Over $250 discount if your job qualifies. Call (747) 837-5834 for a free estimate specific to your attic.
Why Burbank Homeowners Call Warmline Insulation Co. for Owens Corning Work
We’ve been doing this in Burbank since 2011, and Neil Ashford has spent the better part of two decades in attics across the city, including older properties near Magnolia Park where the original insulation is often doing nothing anymore. Our technicians are background-checked, uniformed, and trained specifically on removal and replacement work, not just installs. If your Owens Corning job needs something beyond insulation, like Reflectix radiant barrier for your Burbank attic, we handle that too, because we carry the full range of the industry’s benchmark brands, Owens Corning, Rockwool, CertainTeed, Knauf, and more. Most jobs are completed in a single visit. And every job carries the 90-Day Done Right Promise: if it’s not right, we make it right, in writing.
FAQs
We’re an independent Owens Corning service provider, not an authorized warranty agent, so we can’t process Owens Corning warranty claims directly. But we document everything during removal, including photos and material condition notes, so you have the evidence you need if you pursue a claim. And we’ll advise you honestly on whether a claim is worth pursuing versus replacing the material outright.
Yes, for most standard attic jobs in Burbank, we complete removal and replacement in a single day. Larger attics, heavy contamination, or vermiculite with asbestos protocols can add a second day. We’ll tell you the timeline before we start.
If the existing Owens Corning insulation is dry, rodent-free, and not compacted, adding new material on top is often a cost-effective option. If it’s water-damaged, pest-contaminated, or settled below half its original depth, removal is the right call. Adding insulation over wet or soiled material just locks the problem in. Call (747) 837-5834 and we’ll give you a straight answer after inspecting your attic.
We keep response times short for Burbank homeowners. For urgent situations, like a water-damaged attic or active rodent problem, we can usually get someone out the same day or next morning. Routine removal and replacement quote visits are typically scheduled within a day or two. A live person answers our phone 24/7, so you’ll know your timeline immediately.
Yes. We test vermiculite before we touch it, and if the results show asbestos, we follow full containment and disposal procedures under the appropriate safety protocols. This is not a DIY job, and it’s not one you want a generalist to attempt. Our team is trained for it.
If your Burbank attic still has its original insulation, or the Owens Corning product you trusted is no longer doing its job, let’s fix it. Call (747) 837-5834 for a free estimate. A live person answers, day or night, and most Burbank jobs are completed in a single visit. Good insulation shouldn’t be something you think about. That means it’s working.
Written by Neil Ashford, Owner, Warmline Insulation Co. at Warmline Insulation Co., serving Burbank and nearby areas.