Owens Corning Attic Air Sealing Nationwide

Owens Corning Attic Air Sealing in Burbank: What to Know First

Attic air sealing in a Burbank home with Owens Corning insulation typically runs $1,100-$2,800 depending on attic size and how many bypasses we find, and most jobs are done in a single day. We’re an independent Owens Corning service provider, which means we work on the insulation and air barrier as a complete system, not as separate projects. If your Owens Corning fiberglass or blown-in insulation isn’t performing the way it should, the problem usually isn’t the insulation itself. It’s the air moving through it. Call (747) 837-5834 and a live person will answer, day or night.

Call (747) 837-5834

How Owens Corning Products Fail - and How We Fix Them

Here’s what actually shows up in Burbank attics. Owens Corning makes solid insulation, but even the best material can’t stop air movement on its own. These are the failure patterns we see most often in the field:

• Atticat blown-in fiberglass settling around top plates. In homes across the Magnolia Park and Rancho District neighborhoods, we regularly find Owens Corning Atticat blown-in that has settled or been pushed aside around interior and exterior top plates. The result is conditioned air leaking straight from wall cavities into the attic. We pull back the existing Owens Corning material, foam-seal the plate, and re-fluff the insulation to the proper depth.
• R-30 and R-38 batts compressed around can lights. Older recessed can fixtures in Burbank’s mid-century homes were rarely air-tight rated. Owens Corning fiberglass batts get stuffed around them, which compresses the batt and kills its R-value while air still escapes around the fixture. We install proper rated covers or seal the gap with fire-rated foam before resetting the insulation.
• Attic hatch bypasses nobody ever sealed. The hatch is the most common air leak in any attic, and it’s worse in Burbank because summer heat pushes hot attic air against that unsealed gap for months at a time. We see Owens Corning insulation inches from the hatch doing nothing because the hatch itself has zero weatherstripping. We seal the frame, install proper gasketing, and add an attic-side barrier.
• Duct boot disconnects above Owens Corning batts. Burbank’s older ducted systems often have boots that have pulled away from the drywall over decades of expansion and contraction. The conditioned air that should go into your bedrooms ends up in the attic instead. We pull back the surrounding Owens Corning material, seal the boot to the drywall with mastic and foam, then reset the insulation properly.
• Fiberglass batts that got wet and lost their loft. If a Burbank home has ever had a roof leak or a bath fan vented into the attic, the Owens Corning pink fiberglass loses its structure. Flat, matted insulation doesn’t insulate. We identify the moisture source, fix it, remove the compromised material, and re-install fresh Owens Corning to spec.

Our Owens Corning Attic Air Sealing Process

Every Owens Corning job we do in Burbank follows the same sequence, and most are completed in one visit. Here’s what you can expect:

1. 1
   Call and conversation. You call (747) 837-5834. A person answers. We ask about your energy bills, temperature differences between rooms, and what you’ve noticed in the attic.
2. 2
   Attic inspection. We walk the attic with a thermal imaging camera when it’s useful, checking top plates, penetrations, can lights, duct boots, and the hatch. We also verify the condition and depth of your existing Owens Corning material.
3. 3
   Plan and pricing. We tell you exactly what we found, what we’ll seal, what we’ll reset, and what it costs. No surprise line items, no upsell pressure.
4. 4
   The sealing work. Our techs seal every identified bypass with fire-rated foam, mastic, or gaskets, working around your Owens Corning insulation without compromising it. Where material needs to be removed and reset, we do that carefully.
5. 5
   Verification. We re-check the key points visually and with a thermal scan where it makes sense, confirming the air leaks are closed before we climb out.
6. 6
   Done right, guaranteed. The work carries our 90-Day Done Right Promise. If something isn’t right, we come back and make it right.

What Owens Corning Attic Air Sealing Costs in Burbank

Here’s what we see in Burbank attics, pricing-wise:

• Attic hatch sealing only: $180-$350
• Can light covers and sealing (per fixture): $35-$75
• Top plate and penetration sealing (whole attic): $700-$1,600
• Full attic air sealing with insulation reset: $1,400-$2,800

What moves the price: attic size, access difficulty, how many penetrations exist, and whether your existing Owens Corning material needs to be removed and re-blown or just re-fluffed. Every estimate is free and upfront. And if you’re a senior or veteran, the 5% discount applies automatically. Call (747) 837-5834 for a real number, not a guess.

Why Burbank Homeowners Call Warmline Insulation Co. for Owens Corning Work

We’ve been doing this since 2011, and in that time we’ve worked in attics all over Burbank, from the hillside homes near Stough Canyon to the flatland ranches south of the 134. Neil Ashford grew up in Los Angeles and started this company because he kept finding the same problem: contractors treating insulation as an afterthought. We don’t. We treat your Owens Corning insulation as part of a system, and we seal the air leaks that make it underperform. Our techs are background-checked and uniformed, we answer the phone 24/7 with a live person, and our 90-Day Done Right Promise means we stand behind the work. We also work with other brands like Reflectix when a project calls for it, but Owens Corning attics are a big share of what we do in Burbank. Good insulation shouldn’t be something you think about - that means it’s working.

FAQs